Spicer RING GEAR AND PINION TOOTH PATTERN INTERPRETATION Uživatelský manuál stáhnout pdf

RING GEAR AND PINION TOOTH PATTERN INTERPRETATIO

The final pinion position will be verified by using the GEAR CONTACT PATTERN METHOD described as follows:

RING GEAR TOOTH PROFILE

FACE HOBBING FACE MILLING

The TOE of the gear is the portion of the tooth surface at the end

towards the center. The HEEL of the gear tooth is the portion of

the tooth surface at the outer-end. The TOP LAND of a gear tooth

is the surface of the top of the tooth. Every gear has a

characteristic pattern.

There are two types of gears which are determined by the machining method.

One is manufactured by FACE HOBBING, while the other one is manufactured

by FACE MILLING. You must first determine the type of gear that you have in

order to know which gear pattern chart to use as described in this bulletin. To

do this, notice the depth of the ring gear tooth - dimension "A" and "B". If the

gear was manufactured using the FACE HOBBING method, both "A" and "B"

will be of equal depth. If the gear was manufactured using the FACE MILLING

method, "A" will be larger than "B". Once the type of ring gear machining

method has been identified, refer to the proper gear pattern chart.

NOTE: WHEN MAKING CHANGES, NOTE THAT TWO VARIABLES ARE INVOLVED. EXAMPLE: IF YOU HAVE THE

BACKLASH SET CORRECTLY TO THE SPECIFICATION AND YOU CHANGE THE PINION POSITION SHIM, YOU MAY

HAVE TO READJUST THE BACKLASH TO THE CORRECT SPECIFICATION BEFORE CHECKING THE PATTERN.

REFER TO PATTERN INTERPRETATION.

BULLETIN 5717-A 5/02 1 of 3

Spicer Technology, Inc.

1 2 3

Shrnutí obsahu

Strany 1 - Spicer Technology, Inc

RING GEAR AND PINION TOOTH PATTERN INTERPRETATIONThe final pinion position will be verified by using the GEAR CONTACT PATTERN METHOD described as foll

Strany 2 - (RING GEAR)

PATTERN INTERPRETATION(RING GEAR)FACE MILLINGDRIVE SIDE COAST SIDEHEEL TOE CONDITION TOE HEEL CONDITIONACTION REQUIREDDesirable pattern. The d

Strany 3

PATTERN INTERPRETATION(RING GEAR)FACE HOBBINGDRIVE SIDE COAST SIDEHEEL TOE CONDITION TOE HEEL CONDITIONACTION REQUIREDDesirable pattern. The d

Komentáře k této Příručce

Žádné komentáře

Spicer RING GEAR AND PINION TOOTH PATTERN INTERPRETATION Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro auto Spicer RING GEAR AND PINION TOOTH PATTERN INTERPRETATION. Spicer RING GEAR AND PINION TOOTH PATTERN INTERPRETATION User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Pro auto Spicer RING GEAR AND PINION TOOTH PATTERN INTERPRETATION