Spicer TPCS Troubleshooting Guide: Older Systems (ECU Uživatelský manuál stáhnout pdf (Strana 32)

Troubleshooting

Code Description

Code 13C! indicates a relay problem. Likely causes are either a blown

VBATT fuse, the relay itself, or problems with the relay enable circuit.

After checking the VBATT fuse, an easy second step is to swap a known

good relay and see if the fault is cleared. If the fuse, the relay, and the

relay enable circuit all check out OK, the likely cause of the problem is a

faulty Electronic Control Unit (ECU).

See “Troubleshooting Tips” on page 20 for general guidelines on system

diagnostics.

Code: 13C!

Type: Relay

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Žádné komentáře

Spicer TPCS Troubleshooting Guide: Older Systems (ECU Uživatelský manuál Strana 32